Put the head alignment sheet on the Platen Glass and align its upper left corner with the alignment mark.ĥ. Enter check-marks in the patterns of the head alignment sheet, but only where the image is most solid.Ĥ. Press the or button, in order to be printed the head alignment sheet.ģ. Locate the button, and then press it until the following message ''P'' appears on the control LCD.Ģ. Please note that you will have to execute the short procedure included below, if there are any print quality issues after the successful installation of the new ink cartridge.ġ. Finally, you must return the scanning unit's lever back to its original position, and then close the scanning unit. Once the new cartridge is inserted into the appropriate slot, you must push the cartridge up until it clicks securely into place. Now, you must unpack the new ink cartridge and remove its protective tape, but avoid touching the gold terminals and the nozzles of the new printer's component, and then insert the new ink cartridge into the corresponding slot at angle of 45degrees. Then, you must take the exhausted ink cartridge out of the main unit by pulling it carefully towards you. After that, you must unlock the exhausted ink cartridge by pushing it gently down, but please avoid touching the transparent film, the film cable, the ink absorber, or any other inner metal printer's parts/components. Initially, you must open the scanning unit while the printer is turned on, and then pull the scanning unit's support/lever down. Please note that you should also replace the installed ink cartridges, if there are constantly reappearing print quality issues, such as missing characters or/and white streaks.
Canon pixam mp160 error 5 install#
You must install new ink cartridges of the indicated colors, in order to be restored the normal/full printer's functionality. ''CHECK INK'' or/and ''+'' displayed on the control LCD – This is an error message, which is indicating a completely exhausted ink cartridge/cartridges. ''COLOR INK LOW'' or/and a constantly lit Color cartridge's LED – The installed Color ink cartridge is nearly empty, and needs to be replaced very soon. You should install a new Black ink cartridge soon after the initial appearance of this warning message, in order to be avoided a non-operational printer's mode caused by a completely exhausted ink cartridge (No Ink). ''BLACK INK LOW'' or/and a constantly lit Black cartridge's LED – This message indicates that the installed Black ink cartridge is nearly exhausted/near the end of its useful life.
All messages used by the sophisticated built-in system for indication of a nearly exhausted/emptied or exhausted/emptied ink cartridge/cartridges are listed and described below. Once the system detects an ink cartridge/cartridges related abnormality, it will display an appropriate warning or error message on the control LCD of your printer, in order to notify/warn you about the exact detected issue/problem. Your Canon PIXMA MP160 is equipped with a precise built-in system, which constantly monitoring the status of the installed ink cartridges.
0 kommentar(er)
